A&K Machinery, LTD.
Cam Machine Conversion
635 series Mitsubishi multi-system control with full diagnostic display
240kb part program memory / RS232 interface / 4GB Hard Drive
Floppy Drive
Turret slide driven by 1kw AC digital servo and ball screw
Each cross slide independently driven by .45kw AC digital servo and ball screw
ABS encoders
Total overlapping capability
7.5kw spindle drive with multi-point orientation / higher spindle speeds
Rigid tapping
Servo driven turret-station to station or multiple stations in under 1 sec.
Rapid speeds- 800ipm for turret slide, 300ipm for cross slides
Inches per rev / constant surface feed
Multiple tool offsets
2 year warranty on control / drives, 1 year warranty on motors / encoders
All electrical components replaced and rewired
Custom made enclosure
An Overview of what is performed on all cam machines during the conversion process:
All machines are tore down to casting and painted. The slides are removed and refitted. The left bracket and drum are removed and repaired as necessary. All electrical components are removed and replaced with updated devices. Finally the control and drives are fitted and adjusted and the new enclosure installed.
